Dobbcoin 2.0 - We're getting tha band back together

Nice and tight..  DO THIS:

sudo apt-get update
sudo apt-get upgrade
sudo apt install build-essential libtool autotools-dev automake pkg-config bsdmainutils curl git g++-mingw-w64-x86-64
sudo update-alternatives --config x86_64-w64-mingw32-g++

git clone https://github.com/dobbscoin/dobbscoin-econocalypse.git


cd dobbscoin-econocalypse
cd depends
chmod 744 config.guess
chmod 744 config.sub

make HOST=x86_64-w64-mingw32
cd ..
chmod 744 ./autogen.sh
./autogen.sh
CONFIG_SITE=$PWD/depends/x86_64-w64-mingw32/share/config.site ./configure --prefix=/
chmod 744 share/genbuild.sh
chmod 744 src/leveldb/build_detect_platform
make

SWAP SHIT like this to make other builds..

Common host-platform-triplets for cross compilation are:
i686-w64-mingw32 for Win32
x86_64-w64-mingw32 for Win64
x86_64-apple-darwin11 for MacOSX
arm-linux-gnueabihf for Linux ARM 32 bit
aarch64-linux-gnu for Linux ARM 64 bit

-Vola

Use the following instructions to setup a masternode for a quark based coin.

Make sure that you have the following requirements.

- The required amount of SLACK to setup the masternode. (10,000)
- A wallet to store your coins.
- A server or VPS.

The instructions are split into three (3) sections.



Setup the control wallet (Part 1 of 2)

Open your wallet and wait until the wallet has downloaded the complete blockchain.

Go to “Tools”.
Click “Debug console”.
This is the console where you will execute all commands.

Create a masternode private key.

masternode genkey

Example output: 75eqvNfaEfkd3YTwQ3hMwyxL2BgNSrqHDgWc6jbUh4Gdtnro2Wo

Show your collateral address.

getaccountaddress "masternode"

Example output: Nad4xtgdwf7c5y45ruy5MWtVY43zYMCvva

Keep note of the masternode private key and the collateral address.



Setup the VPS

Update your VPS machine:
sudo apt-get update
sudo apt-get upgrade

Install the required dependencies.

sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils python3 libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-test-dev libboost-thread-dev libboost-all-dev libboost-program-options-dev
sudo apt-get install libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler unzip software-properties-common

To install Berkeley DB from source code.

wget https://download.oracle.com/berkeley-db/db-4.8.30.zip
unzip db-4.8.30.zip
cd db-4.8.30
cd build_unix/
../dist/configure --prefix=/usr/local --enable-cxx
make
sudo make install

And what the fuck is this?
sudo apt-get install dirmngr
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update

Install the coins daemon and tools.
Create the coins config file.

mkdir $HOME/.econocalypse
nano $HOME/.econocalypse/econocalypse.conf

Paste the following lines in econocalypse.conf

############# START
 
rpcuser=rpc_examplecoin  # What are you needed for..
pcpassword=kuw05sqio7bcm8z96o7redv17xws1lw6xpd1qf33
rpcallowip=127.0.0.1

listen=1
server=1
daemon=1
maxconnections=64

masternode=1
masternodeprivkey=REPLACE_WITH_MASTERNODE_PRIVATE_KEY # stuff from 'masternode genkey'
externalip=REPLACE_WITH_EXTERNAL_IP_OF_VPS

############# STOP


Start your node with the following command.

./examplecoind &




Setup the control wallet (Part 2 of 2)

Transfer the required amount of coins to the “collateral address” that you created using the command “getaccountaddress "masternode1"”.

Wait until the transaction has the required masternode confirmations.

Go to Tools.
Click Debug console.

Enter the following command.

masternode outputs

Example output

[
  {
    "txhash": "429a5caf40178d6911ab71e61d6952a6cec8710405d8dc912d8e8a760a2ba24c",
    "outputidx": 1
  }
]


Go to “Tools”.
Click “Open Masternode Configuration File”.

Modify the following line and paste it into notepad.

masternode xxx.xxx.xxx.xxx:xxxx 75eqvNfaEfkd3YTwQ3hMwyxL2BgNSrqHDgWc6jbUh4Gdtnro2Wo 429a5caf40178d6911ab71e61d6952a6cec8710405d8dc912d8e8a760a2ba24c 1

masternode - Alias for your masternode.

xxx.xxx.xxx.xxx - External IP of your VPS.

xxxx - Replace with P2P port of your coin.

75eqvNfaEfkd3YTwQ3hMwyxL2BgNSrqHDgWc6jbUh4Gdtnro2Wo - Masternode private key from the command “masternode genkey”.

429a5caf40178d6911ab71e61d6952a6cec8710405d8dc912d8e8a760a2ba24c - Value “txhash” from the command “masternode outputs”.

1 - Value “outputidx” from the command “masternode outputs”.

Save the file and close editor.

Shutdown your wallet and re-open your wallet.

Go to “Settings”.
Click “Unlock Wallet”, If it was encrypted.

Enter your wallet passphrase and unlock your wallet.

Go to “Tools”.
Click “Debug console”.

Start your masternode using the command.

startmasternode alias false masternode1

It will take +/- 30 minutes to activate your masternode.

Based on Zerocoin / PIVX a QUARK algo: Proof-of-Work/Proof-of-Stake

This is DISPOSABLE, but please feel free to learn how it works and help move blocks in the mean time. If it succeeds, we'll rebrand it as DobbsCoin, change its ACRONYM and BUY Back BOB.

<endciv> EndCiv's next GEN BOB candidate demo: m3gaViral
<endciv> Based on Zerocoin / PIVX a QUARK algo: Proof-of-Work/Proof-of-Stake
<endciv> https://github.com/EndCiv/m3gaviral/releases/tag/m3gaViral
<Prints> Shocked
<endciv> its just a  RoboCreated Shitcoin upgrade concept
<endciv> but it works and is mining POW blocks NOW

Download: NO SOURCE YET - ROBOT Created Shitcoin / Example
https://github.com/EndCiv/m3gaviral/releases/tag/m3gaViral

Open your wallet.
Your wallet is connected when you see the icon Wallet connections Quark in the lower right corner of your wallet. The message “No block source available” will disappear once you mine your first block.

Close your wallet and create the file m3gaviral.conf in the folder “%APPDATA%\m3gaviral\”.
Paste the following text into m3gaviral.conf and save the file.

addnode=node1.fucktheconspiracy.com

Open your wallet.
Go to Tools.
Click Debug console.
This is the console where you will execute all commands.

Type this command to start mining your first block:
setgenerate true -1

If you want to use a specific number of CPU cores, instead of -1, type the number of cores.
You can type the following command to see the status of generation.

getmininginfo

It will take about +/- 10 minutes to mine your first block, depending on your computer hardware.

Why did they stop building again?

Was it cos updated server libs / versions.. ?
How come shit isn't backwards compatable..
How come shit doesn't just use the latest libz?

What version will the new wallets be?